Latest Posts

view all

Blog categories

HP ProLiant ML150 G6 Server Series

HP ProLiant ML150 G6 Server Series

The HP ProLiant ML150 G6 is an entry, dual-processor server that is optimized for price performance. The server ships with improved HP ProLiant Easy Set-up CD for better deployment as well as Insight Management Agents for SIM manageability.  

More details

Standard Features

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
Processor
One of the following depending on Model
Quad-Core Processors
Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details
Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2)
Processor 
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details
Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W, DDR3-800) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details
Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W, DDR3-800) Processor
Dual-Core Processors
Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W, DDR3-800) Processor
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.

Cache Memory 
One of the following depending on Model
Integrated 1 x 8MB level 3 cache (E5540, E5530, E5520 sequence)
Integrated 1 x 4MB level 3 cache (E5506, E5504, E5502 sequence)

Chipset Intel® 5500 Chipset
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/

Upgradeability Upgradeable to two processors (dual or quad-core)
NOTE: Please contact your regional sales support.

Memory
One of the following depending on Model
Type DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
DIMM Slots Total 12 DIMM slots
Standard 
(Entry/Base Models)
2 GB
Standard
(Performance Models)
4 GB
Maximum (RDIMM) 48 GB (12 x 4 GB) for Registered Memory configurations
Maximum (UDIMM) 48 GB (12 x 4 GB) for Unbuffered Memory configurations
NOTE: Depending on the memory configuration and processor model the memory speed may run at 1066MHz or 800MHz. See the Online Memory Configuration Tool for details:http://www.hp.com/go/ddr3memory-configurator.

Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter

Expansion Slots #
Technology
Bus Width**
Connector Width
Bus Number*
Form Factor
Notes
1
32-bit/33MHz PCI
N/A
N/A
1
Full length, full height slot
Non Hot-plug
2 PCI-Express
(Gen 1)
x4 x8 2 Full length, full height slot Non Hot-plug
3 PCI-Express
(Gen 2)
x4 x8 7 Full length, full height slot Non Hot-plug
4 PCI-Express
(Gen 2)
x16 x16 5 Full length, full height slot Non Hot-plug
5 PC-Express
(Gen 2)
x4 x8 6 Full length, full height slot Non Hot-plug
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Indicates the number of physical electrical lanes running to a PCI-e connector.

Storage Controller
One of the following depending on Model
Entry Model HP Smart Array B110i SATA RAID Controller (RAID 0,1,10) 
NOTE: To enable RAID for HP Smart Array B110i SATA controller, use EZ set-up CD to download driver, hpahcisr.sys, part of EZ Set-up CD 
For more information go to: www.hp.com/go/sataraid.
NOTE: SA B110i SATA RAID Controller ships standard with every server.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.
Base Model HP Smart Array P410/Zero Memory RAID Controller (RAID 0,1std)
Performance Model HP Smart Array P410/256MB RAID Controller (RAID 0/1/1+0/5/5+0)

Internal Storage Devices
One of the following depending on Model
Diskette Drive None ships standard
Optical Drive HP Half-Height SATA DVD-ROM Optical Drive ships standard
Hard Drive Performance and Base Models (Hot Plug): None ships standard
Entry Model (Non-Hot Plug): 1x160GB NHP SATA Drive
NOTE: Support for additional 4 LFF SAS/SATA hot plug drive requires 2nd hot-plug hard disk drive cage, 750W CS HE Power Supply, Redundant Power Supply Enablement Kit and HP Smart Array P410 Controller (if not already part of the configuration).

Maximum Internal Storage
One of the following depending on Model
SATA 24.0TB (8 x 3TB 3.5") SATA
SAS 24.0TB (8 x 3TB 3.5") SAS
NOTE: HP Smart Array B110i SATA RAID controller support for a single logical drive is limited to 2TB.
NOTE: Support for more than 4 hard drives requires the purchase of one (1) Hot-plug hard drive cage (P/N: 487737-B21), one (1) HP 750W Common Slot Gold Hot Plug Power Supply Kit (P/N: 512327-B21), one (1) Redundant Power Supply Enablement Kit (P/N: 508544-B21) and HP Smart Array P410 Controller (if not already part of the configuration). 
NOTE: Supports up to eight (8) SAS/SATA hard drives via 2nd hot plug hard disk drive cage, 750W CS HE Power Supply, Redundant Power Supply Enablement Kit and HP Smart Array P410 Controller.
NOTE: HP NHP Internal SAS/SATA 4 Port Cable Kit (487734-B21) is required when adding Smart Array P410 Controller on Non-Hot Plug SATA/SAS server models.

Interfaces Parallel 0
Serial 1
Pointing Device (Mouse, PS2) 1
Graphics 1
Keyboard (PS2) 1
USB 2.0 Ports 8 total (4 Rear, 2 Front, and 2 Internal)
NOTE: 1 Dedicated USB port available for internal USB tape connectivity
Network RJ-45 (Ethernet) 1 (10/100/1000 bits/s)
Remote Management HP Lights-Out 100i Baseboard Management Controller

Industry Standard Compliance ACPI V2.0 compliant
PCI 2.3 compliant
IPMI 2.0
DCMI 1.0
PXE Support
WOL Support
Microsoft® Logo certifications

Server Power Cord One Lowline NEMA power cord

Power Supply Standard: HP 460W Factory Integrated Power Supply
Optional: HP 750W Common Slot Gold Hot Plug Power Supply
NOTE: The installation of the optional 750W Redundant Power Supply requires a HP Redundant Power Supply Enablement Kit (P/N 508544-B21). 
NOTE: Two (2) 750W Redundant Power Supply units and one (1) RPS enablement kit (P/N 508544-B21) are required to achieve redundancy.
NOTE: The 2nd hot plug hard disk drive cage requires the purchase of 750W Redundant Power Supply, Redundant Power Supply Enablement Kit and HP Smart Array P410 Controller (if not already part of the configuration)

System Fans System supports a total of four (4) fans
Two (2) fans ship standard for 1P configuration - Non-hot plug, Non-redundant system fans
NOTE: For redundancy, please order a redundant fan option kit (513927-B21) which comes with 2 fans
Three(3) fans ship standard for 2P configuration - Non-hot plug, Non-redundant system fans
NOTE: If customer orders the standalone redundant fan option kit (513927-B21), two (2) fans in a two-fan packaged box will be received. Only one (1) fan is required for system redundancy. The other one can be saved as a spare part.
NOTE: If customer orders the redundant fan kit along with the server, the extra fan will not be received.

Operating Systems and Virtualization Software Support for ProLiant Servers

Microsoft Windows Server Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport

Graphics

32MB shared supporting all display resolutions up to 1600x1200 16bpp @75Hz
NOTE: 8MB is dedicated to video memory.


Form Factor Tower (5U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the options section in this QuickSpecs.

Embedded Manageability HP LO100i Advanced

HP LO100i Lights-Out 100 Baseboard Management Controller with Optional LO100i Advanced Licenses for Virtual KVM and Virtual Media.

Features:

  • Embedded IPMI standard reporting
  • System event log access
  • Remote Serial console (serial redirection)
  • Browser, Telnet access
  • SMASH-CLP compliant
  • IPMI 2.0 compliant
  • DCMI 1.0
  • Secure Socket Layer Encryption
  • Secure Shell Encryption
  • Virtual media (Floppy, CD, USB 2.0) with Advanced License
  • Virtual KVM with Advanced License
NOTE: For more information, please refer to the QuickSpecs for the LO100i found at: www.hp.com/go/lo100

Manageability HP Integrated Lights-Out 100i Baseboard Management Controller with optional LO100i Advanced Licenses for Virtual KVM and Virtual Media.
Embedded IPMI standard reporting
Easy Set-up CD and ISO Image Web downloads
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU) 
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM) Integration

Security Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)

Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. (3-1-1 warranty offered only in Brazil and APeJ). Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: